JUPITER is a high-performance high-bay with a wide range of outputs, options and attachments.
Three wattages are available, 100W, 150W and 200W, with efficiency up to 167 l.lm/c.W.
1-10V dimming is supplied as standard, but its use is optional. Also available are a plug-in microwave sensor, a refractor, a reflector and a stirrup mounting bracket.
Emergency versions can be created by the addition of a plug-in emergency kit (ordered separately), available in manual and self-test versions, avoiding the need for separate twinspots to be installed.
- Industrial premises
- Large retail sites
- Public areas in airports, railway stations and coach terminals
- Cold stores, suitable to -30oC (except emergency)
- Harsh environments to +45oC (except emergency)
- Die-cast aluminium body, matt black painted
- UV stable clear polycarbonate front panel
- LEDs mounted on metal core PCB for good heat dissipation
- Driver in separate die-cast aluminium enclosure, mounted on rear of main body
- Pre-wired with 1m of H05 mains cable and 1m of H05 1-10V control signal cable
- Supplied with a steel eyelet for suspended mounting. For surface mounting a stirrup bracket is available
- 190 lm/W
- 3 wattages available:
- 100W, 15,679 lm at 99.2W, 158 l.lm/c.W
- 150W, 23,759 lm at 149W, 159 l.lm/c.W
- 200W, 31,664 lm at 190W, 167 l.lm/c.W
- CRI >80, CCT 4000K, beam angle 90º
- 1-10V dimming. Supplied ready for 1-10V dimming, use optional
- Dimming. Supplied ready for 1-10V dimming
- Emergency. Available with a separate non maintained emergency pack. Suffix /NM3L or /STNM3L
- Attachments to be ordered as separate items:
- Refractors (polycarbonate) and reflectors (aluminium)
- Stirrup mounting bracket for mounting direct to a surface
- Microwave sensor. Plug-in microwave occupancy sensor available, programmable via an infra-red handset. Both items to be ordered separately.